Product Introduction:
It is a professional application for the detection of adhesives,
adhesive tapes, self-adhesives, medical patches, protective films,
release papers, composite films and other products, and can also be
used for peeling, pulling off and other performance tests of
artificial leather, film, paper and other related products.
Referring to the ISO national standard and the latest national
standard for paper tubes, it is a re-developed instrument. It is a
mechatronics structure, and adopts modern mechanical design concept
and microcomputer processing technology for careful and reasonable
design. The instrument adopts the lower clamp fixed type, and the
measurement accuracy is high. It has a powerful data processing
function, which can directly obtain the statistical results of
various data.
Technical Parameters:
Capacity selection 5 kg
Accuracy level Level 0.5
Load accuracy ±0.5 %
Stroke resolution 0.001 mm
Display resolution 0.1 g
Force resolution 1/300000
Valid itinerary 650 mm
Speed of experimentation 0~500 mm/min
Test width Ø120 mm
Shutdown mode Overload stop, emergency stop button, specimen damage
automatic stop and reset, upper and lower limit setting automatic
stop
Safety devices Overload protection, limit protection
Strength unit switching Kgf,gf,N,kN,lbf
Stress unit switching N/m,N/cm,N/mm,N/25mm
Executive Standards:
GB/T4850-2002 Determination of low-speed unwinding strength of
pressure-sensitive adhesive tape
GB8808-1988 Peel test method for soft composite plastic materials
GB/T2790-1995 Test method for 180 degree peel strength of adhesive
GB/T2791-1995 Test method for T peel strength of adhesives
GB2792-1998 Test method for peel strength of pressure sensitive
adhesive tape 180
ASTM D3330/D3330M-2004(2010) Test Method for Peel Adhesion of
Pressure-Sensitive Tapes
Operational Functions:
1. Automatic clearing: When the instrument receives the test start
instruction, the measurement system will automatically clear it;
2. Automatic test: Put the sample into the fixture, press the "test
button", and the instrument will automatically complete the whole
test process;
3. Automatic return: After the sample is tested, the instrument
will automatically identify and the instrument will automatically
return to the initial position, which is convenient for the test of
the next sample;
4. Automatic saving: Automatic saving of test data and test
conditions;
5. Display mode: Microcomputer liquid crystal display, data dynamic
display with the test process.
Protection Functions:
1. Limit protection: with program-controlled and mechanical
two-pole protection to ensure that the instrument works normally
within the set stroke;
2. Overload protection: when the load reaches 95% of the force
sensor, the instrument will stop automatically;
3. Automatic diagnosis: check the measurement system and drive
system regularly for overvoltage, overcurrent, overtemperature,
etc., and stop the machine immediately if there is an abnormality.
