Equipment Application:
It is mainly applicable to communication products and automotive
parts (such as automotive rearview mirrors, automotive audio
systems, automotive electronics, automotive lighting, and
automobiles)
Waterproof performance tests and IP waterproof grade tests are
conducted on products such as lamps, motorcycle lamps, motorcycle
rearview mirrors, outdoor lighting and signal devices, etc.
Structure:
The interior of the waterproof test chamber is made of SUS304
stainless steel plates, and the water tank is also made of SUS304
stainless steel plates, featuring
Low position and full water indication. The spray pipe is made of
seamless stainless steel pipe. The turntable is made of stainless
steel. The nozzle is detachable and equipped with a plug
Customers can replace the spray holes at any time according to the
number required by the standard. The door of the test chamber is a
single door. Left-opening, with a large observation window and
equipped with a wiper
Brush box type rain test chamber, waterproof test chamber
The waterproof testing machine complies with the standards: GB4208,
IEC60529, GJB150, GB10485, IPX4, IPX3
Main Parameters:
1. Model: CF8321 XP34
2. Working dimensions: 600*600*600 W*H*D (mm)
The outer box dimensions are approximately 1450*1650*1200mm
3. The diameter of the water spray ring is 400mm
4. The pipe diameter is φ16mm
5. The diameter of the spray hole is φ 0.8mm
6. The hole diameter spacing is 50mm
7. Swing pipe amplitude: 1-220°(adjustable from 60°, 90° to 130°),
controlled by a stepping motor
8. Rain water pressure: 50-300kpa(adjustable)
9. Test bench size: ￠400mm
11. Pipe swing: SUS304 stainless steel plate
14. Protective device: Leakage protection
15. Power Supply (V) : 220V
16. Power (KW) : 3KW
17. Controller: Taiwan Weilun controller
Box Structure:
The material inside the box is made of high-quality stainless steel
plate SUS304
2. Large-area visible glass door, facilitating the observation of
the test sample's condition inside the test chamber.
3. The bottom of the test chamber is equipped with high-quality
fixed PU movable wheels, which is convenient for users to move.
4. Sample stage with adjustable speed;
5. Water filtration device
Equipment Usage Conditions:
Voltage: Single-phase three-wire system 220V±10%; 50 Hz;
2. Ambient temperature: 5 to 28℃; (Up to 35℃, but it will affect
some performance);
3. Environmental humidity: < 85%R.H (25℃);
4. Atmospheric pressure: 86 to 106Kpa;
5. Environmental conditions: There should be no strong vibration,
no strong electromagnetic field interference, no high-concentration
dust or corrosive substances, and no direct sunlight or direct
radiation from other heat sources around the equipment site.
6. The equipment should be placed horizontally in a well-ventilated
laboratory, with sufficient space left around it for operation and
maintenance
