one Scope of application
A method used to determine the fire response performance of building materials or products (excluding floor coverings and products referred to in EC Resolution 2000/147/EC) in a single burning test (SBI).

Ii. Compliance with Standards
It complies with the requirements of the GB/T 20284-2006 standard "Test for Single Burning of Building Materials or Products" and the EN13823 test standard "Test Method for Single Burning (SBI)".

Iii. Performance Parameters
The equipment includes a combustion test laboratory, a control room, a trolley, an exhaust pipe, a data collection and analysis device, and a gas supply control device.
1. Combustion test chamber: L3000*W3000*H2400(MM). The top of the room is equipped with a gas collection hood connected to the sampling pipe and an exhaust pipe. There is space for natural air intake and exhaust under the small trolley. During the test, the heat released by the combustion of the samples and the combustion products must be discharged through the smoke exhaust pipe, which is built with brick walls.
2 The ignition source is a 31KW propane right-angle sandbox burner (with a side length of 250MM and a height of 80MM) placed in a vertical corner of a small trolley.
3 A comprehensive sampling area is set up in the smoke exhaust duct for placing sensors and sampling tubes.
4 Smoke exhaust velocity: 0.50 cubic meters /S to 0.65 cubic meters /S.
5 Indoor environmental temperature measurement: K-type armored thermocouple with a diameter of 1MM. Environmental pressure test: ±200Pa.
6 Flue gas duct temperature measurement: Imported K-type armored thermocouple with a diameter of 0.5.
7 Temperature measurement accuracy: 0.5℃.
8 High-precision pressure sensor for flue ducts, with an accuracy of ±2Pa
9 The accuracy of the time recording system is 0.1 seconds.
10 Test duration: 1 to 30 minutes can be set.
11 The smoke density measurement system can measure the smoke density during the test process.
twelve The gas analyzer and its key components are all original imports.
13 It is equipped with an embedded computer and an 8.4-inch LCD display, and offers multiple communication interface options such as TCP/IP and RS-232
fourteen Oxygen measurement: Measurement range: 0-25%
15 Signal output: 4-20mA
16 Response time T90:≤2 seconds
17 Ambient temperature: 0-45℃
18 Relative humidity: <90% (no condensation)
19 Linearity: <± 0.1%O2
20 Zero drift: 0.05% O2 (for one week)
21 Repeatability: <±0.02% O2;
22 Carbon dioxide (CO₂) measurement
23 Measurement range: 0-10%
24 Revenge: < ±1% of the internal structure of the control cabinet
25 Zero drift: ≤2% per week
26 Range drift: ≤2% per week
27 Linear deviation: < ±1%
28 Response time :T90≤2 seconds
29 The data acquisition system can collect and record test data such as oxygen concentration, carbon monoxide concentration, temperature, smoke density, heat release rate, and mass loss rate, and can be saved.

CHENGFENG is a professional manufacturer of Building materials/ Wire/ Plastics/ Rubber Fire retardant testing equipment

About CHENGFENG Company:

CHENFENG TESTING EQUIPMENT CO., LTD (DAXIAN INSTRUMENT EQUIPMENT CO., LTD) is Located in Changan Town (Dongguan City ,Guangdong Province, China),a famous historical town with prosperous industry and convenient transportation.

We are a high-tech enterprise which is specialized in developing and manufacturing Fire Testing Equipment, Building Material Fire Tester, Wire and Cable Fire Tester, Environmental Test Chamber, Textile Testing Equipment, Toys Testing Equipment and etc.

CHENGFENG's testing equipment are widely used in various field: scientific institutions, colleges, inspection institutions, auto parts, electronics, electricals, LED, photoelectricity, mobile, plasticand rubber, telecommunication, chemical industry, aerospace, building material and product, wire and cable,textile and fabrix, etc.

All CHENGFENG testing equipment are designed according to international test standards, such as ISO, ASTM, DIN, EN, GB, BS, JIS, UL, TAPPI, AATCC, IEC, VDE, CSA,CEN and so on.

Our service:
1. High quality guarantee.
2. Shipment with professional documents.
3. Packing as your request, with photo before shipment.
4. Reply within 48 hours and provide solution within 3 working days
5. Professional after-service from our engineers.
6. Warranty period 12 monthes.

Our advantages:
1. Professional technology support.
2. Full experience of large numbers containers loading in Chinese sea port.
3. Fast shipment by reputed shipping line.
4. Best service after shipment with emails.
5. We are professional test equipment manufaturer in China with excellent experience and skills, also have best quality products.

6. In-time after-sale service.